Your shopping cart is empty!
Models 1700/1800
Wurlitzer models 1700/1800
Letter, Number decals for plastic Titlestrip Holders Wurlitzer Model 1700 with the single titlestrips - in red.
These Decals will rejuvinate your faded titlerack. Simply clean off the original printing : this is important as otherwise you will possibly have a ghost image showing through the decals. When the plastic is clean and dry align the decal without removing its backing. When in position peel a section off the backing and carefully smooth into position avoiding air bubbles. The rest of the backing can then be removed and very carefully smoothed on to the plastic. When applied the decal covers all the titlerack and so, with a scalpel, carefully cut out the excess from each space. It can take some time to get it right but well worth being careful to get good results.
£21.00
Letter, Number decals for plastic Titlestrip Holders model 1700 with normal double titlestrip holders - in red
These Decals will rejuvinate your faded titlerack. Simply clean off the original printing : this is important as otherwise you will possibly have a ghost image showing through the decals. When the plastic is clean and dry align the decal without removing its backing. When in position peel a section off the backing and carefully smooth into position avoiding air bubbles. The rest of the backing can then be removed and very carefully smoothed on to the plastic. When applied the decal covers all the titlerack and so, with a scalpel, carefully cut out the excess from each space. It can take some time to get it right but well worth being careful to get good results.
£20.00
Letter, Number decals for plastic Titlestrip Holders Wurlitzer 1800 - grey
These Decals will rejuvinate your faded titlerack. Simply clean off the original printing : this is important as otherwise you will possibly have a ghost image showing through the decals. When the plastic is clean and dry align the decal without removing its backing. When in position peel a section off the backing and carefully smooth into position avoiding air bubbles. The rest of the backing can then be removed and very carefully smoothed on to the plastic. When applied the decal covers all the titlerack and so, with a scalpel, carefully cut out the excess from each space. It can take some time to get it right but well worth being careful to get good results.
£20.00
Volume Control Key : Used by Wurlitzer , Seeburg and Rock-Ola to turn their preset volume controls
£4.00
Titlerack Escutcheon set for Wurlitzer models 1800 and the model 1700 with double titlestrips
£10.00
Record Carousel letters and numbers model 1800
£15.00
Cobra Screened Cable for Mono Wurlitzer model - used from the top arch down to the amplifier
Price is per metre
£3.00
Cobra Decal (NOT waterslide, this is a very thin vinyl sticker - beautiful ) found in all Wurlitzers that use the 'Cobra' needle sound system.
Usually on the mechanism cover. This one will not break up with time !
£12.00
Heavy Duty Microswitch used in Wurlitzer mechanisms, fifties onwards, in various positions including selection reverse (not German types)
£12.50
Fluorescent starters as used in USA 110 volt machines ALL WATTAGES
These are for All makes that use a stepdown transformer from 240 - 110 volts
If in doubt ask before you order
£1.10
Powered By Babbit WD
The Jukebox Man © 2024
The Jukebox Man © 2024